EDCO 2EC-NG-3HP Magna-Trap Dual-Disc Floor Grinder - 3HP Electric Engine, 230 V / A
The EDCO 2EC-NG-3HP Magna-Trap Dual-Disc Floor Grinder is perfect for smoothing concrete, preparing floors for new coverings, and removing thinner coatings. This dual-disc model can grind up to 500 square feet per hour. The Multi-Tooling Disc with carbide pockets allows you to bolt on tungsten carbides directly to the disc for stripping applications. And with the GRIND WEDGE-LESS design, you no longer need wooden wedges. Plus, the GRIND LEVEL feature lets you adjust the machine’s height and use a wide range of accessories for a truly level grind.
Features
- NEW Multi-Tooling Disc with carbide pockets. Bolt tungsten carbides directly onto the disc for stripping applications.
- GRIND WEDGE-LESS: The need for wooden wedges goes away with EDCO’s Magna-Trap® Slide-On Tooling.
- GRIND LEVEL: Using EDCO’s exclusive Leveling System you can adjust the machine’s height, use a wide range of accessories, and truly grind level. Level grinding is quicker, smoother, easier on the operator, and increases accessory life.
- VELCRO DUST SHROUD: This new heavy-duty Velcro Dust Shroud makes dust prevention easier. Simply readjust the shroud according to the height of the accessory being used.
- Laser-Cut Weight Tray: This built-in weight tray accepts up to 80lbs. of extra weight!
- Multi-Vac port for use with 2″ or 3″ vacuum hose
- 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts
- Gas & electric power options available
- Includes 2 magnetic multi-accessory discs with carbide pockets, which accept Dyma-Serts, Strip-Serts and all other Magna-Trap® grinder accessories
- Counter-rotating discs prevent machine from pulling side to side and give operator greater control
- 6 grinding accessories required per loading
Product Specifications
Part # |
59600 |
Power |
Electric |
Horse Power |
3 HP |
Phase |
Single Phase |
Voltage |
230 V |
Length |
46" |
Width |
27" |
Height |
37" |
Weight |
59600 lbs |